DD6 Vertical Glass Drilling Machine

DD6, in flat glass sheets hole and countersink It is a vertical glass drilling machine designed for various operations. Thanks to its robust construction, it can operate as a standalone solution or as part of an existing vertical machining line. It features a computer-controlled system and... torque control This feature allows for high-precision machining by reducing the risk of cracking in flat, shaped, and laminated glass. Switching between different hole diameters is possible without operator intervention thanks to the 6+6 automatic tool changing and turret system.

Get a Quote

1 +6

Automatic Tool Changer

1 "

HD Control Panel

1 +

Years of Production Experience

Precision in drilling and countersinking, even a perfect fit.

Glass drilling is the most delicate step in the machining line: incorrect torque, incorrect speed, or insufficient cooling can mean loss even in a single sheet. DD6 addresses this risk at the hardware level and delivers repeatable results in mass production.

Vertical Position, Limited Space

The vertical operating principle requires significantly less workshop space compared to horizontal machines. Glass handling time is shortened, and the machine can operate inline with washing and grinding units on the same line.

Torque Controlled Drilling

Computer-controlled torque management continuously monitors the pressure applied by the diamond tool to the glass. The risk of chipping and cracking at the exit end is reduced; clean holes are obtained even in laminated and coated glass.

Turret and Automatic Tooling

Thanks to the 6+6 automatic tool changing and turret system, switching between different hole diameters and countersink angles is done without operator intervention. Tool reading and sharpening features extend tool life.

DD6 Technical Specifications

The values below vary depending on the machine configuration. For exact values specific to your project and a detailed technical data sheet, please contact us. Contact us.

DD6 Vertical Glass Drilling Machine — technical data
Maximum glass size (W × H)	—
Minimum glass size (W × H)	—
Glass thickness range	—
Hole diameter range	—
Maximum drilling depth	—
countersink angle	—
Automatic tool changer	6 + 6 (turret system)
Team reading / sharpening	There is
Control Panel	HD 18″ touchscreen
Types of glass that can be processed	Flat, shaped, laminated
Total installed power	—
Operating voltage	—
Air pressure requirement	—
Machine weight	—

“Values marked with "—" are determined according to the machine configuration.

DD6 Hardware and Capabilities

DD6 is configured for applications where hole precision directly determines waste, such as architectural glass, insulating glass, pre-tempering preparation, and shower enclosure production.

Drilling

Double-sided, axially aligned drilling in flat and shaped glass sheets.

Countersinking

Ability to countersink recesses for flush-mounted fittings.

6+6 Automatic Tool Changer

With the turret system, diameter and angle transitions occur seamlessly.

Team Reading and Sharpening

The tool length is automatically read, and the worn diamond tool is sharpened on the machine.

Laminated and Shaped Glass

Processing support for flat, shaped, and laminated glass types.

HD 18" Control Panel

Prescription identification and monitoring via a high-resolution touchscreen panel.

Get a quote for DD6.

Share your glass dimensions, thickness range, and line configuration; let's determine the right DD6 configuration and delivery time together.